There have a Vibratory Feeder Control Unit-SDVC20-L CUH for Vibratory. The SDVC20-S and L type CUH Feeder Control Unit for Vibratory Bowl feeder/Parts feeder/Linear Feeder/electromagnetic vibratory feeding control in Bangladesh.
Description: Feeder Control Unit-SDVC20-L CUH
The indoor digital voltage parameter circuit can abbreviate tools speed variation mains voltage function. The controller will raise the output voltage from 0 to the present value. 2 NPN switch sensors or PLCs can be joined to turn switch both on and off the regulator.
Photoelectric Sensor ON/OFF Control:The CUH Astute Photo-electric Sensor can connect to turn on/off the controller. Output voltage of the controller adjusts remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
The controller can output low voltage DC power related to ON-OFF Control of the controller to drive a solenoid or extra outside devices. Overheating Aegis: If the internal temperature of the controller gets too high, the controller will stop its output to bulwark itself.
Specification: SDVC20-L CUH
Name-Feeder Control Unit-SDVC20 | Min | Max |
Input Power Voltage | 85V | 440V |
Output Power Voltage | 0 | 440V |
Output Current | 0 | 10A |
Output Frequency
|
50/100 Hz | |
60/120 Hz | ||
Output Power | 0 | 2200VA |
Output Waveform | Tangent Sine | |
Voltage Adjust Accuracy | 1V | |
Time Delay Range | 0 | 20s |
Time Delay Accuracy | 0.1s | |
Soft Startup Time | 0 | 10s |
Auxiliary Power Supply Voltage | 22 | 26V |
Auxiliary Power Supply Current | 0 | 200mA |
Standby Power Consumption | 1.5 | 3W |
Feeder Control Unit Display Method | 4digit | |
Feeder Control Unit-SDVC20 Control Method
|
1-5V | |
Standard TTL Electric Level |
||
4 Buttons plus LED |