5ACCIF01.FPSC-001 POWERLINK interface node with CAN bus master RS232 interface
B&R Automation Interface option 5ACCIF01.FPSC-001 is equipped with a POWERLINK, RS232, CAN bus master and X2X Link master interface. Technical Specification 512 kB nvSRAM is installed. Also, 5ACCIF03.CETH-000 Interface card 2x ETH 10/100/1000 interface for APC2200/PPC2200 with a new device.
Description:
- 1x POWERLINK interface managing or controlled node
- 1x CAN bus master interface
- 1x X2X Link master interface
- 1x RS232 interface, 512 kB nvSRAM
- Compatible with APC2100/PC2100 and APC2200/PPC2200
Technical Information:
| POWERLINK | |
| Type | Option Card |
| Variant | RJ45, shielded |
| Transfer rate | 100 Mbit/s |
| Transfer | 100BASE-TX |
| Line length | Max. 100m between two stations |
| CAN Option | |
| Variant | 10-pin, male |
| Transfer rate | Max. 1 Mbit/s |
| Terminating resistor | |
| Type | Can be switched on and off with slide switch |
| Default setting | Each off |
| X2X Type | |
| Type | X2X Link master |
| Variant | 10-pin, male, galvanically isolated |
