Programming Cable LG K120 USB-LG/LS USB 2.0 K80 K all series PLC. The LG/LS PLC Programming cable For Master-K120 Master-K80 Series PLC to PC Communication Cable(USB). The PLC Programming cable For Master-K120, Master-K80 Series PLC to PC Communication Cable USB-LG-XGB
The step next is just to operate this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are precisely equipollent to in the traditional programming cables with RS232 interfaces. Support to LS Master K plc which is made by korea
To connect to an LG K120, K80, or other K series PLC using a USB cable, you’ll need a specific programming cable designed for these PLC models. Here’s a general guide on how to go about it:
- Identify the Programming Cable: Ensure you have the correct USB programming cable compatible with LG K120, K80, or K series PLCs. The cable should typically have a USB connector on one end and the specific PLC connector on the other end.
- Install PLC Software: Install the necessary programming software for your LG PLC. This software is usually provided by LG as part of the programming package for their PLCs. Ensure the software supports your PLC model.
- Connect the Cable:
- Plug the USB end of the programming cable into your computer.
- Connect the PLC end of the cable to the programming port on your LG PLC (usually located on the front or side of the PLC).
- Check Connection: Once connected, check if your computer recognizes the PLC. You might need to install drivers for the USB programming cable. These drivers are typically provided along with the programming software or can be downloaded from the manufacturer’s website.
- Launch Programming Software: Start the programming software on your computer.
- Configure Software:
- Within the programming software, configure the communication settings to match the connection type (USB) and the specific PLC model (e.g., LG K120, K80).
- Select the communication port (typically USB) and configure any other necessary parameters (baud rate, parity, etc.).
- Establish Communication:
- Once the software is configured, attempt to establish communication with the PLC. This may involve scanning for available PLCs or manually entering the PLC’s address.
- If the connection is successful, you should be able to download/upload programs, monitor PLC status, and perform other programming tasks.
- Programming and Monitoring: Use the programming software to write, debug, and monitor your PLC programs. Ensure you follow the specific guidelines provided in the software manual for your PLC model.
- Testing and Validation: After programming, test your PLC to ensure it functions as expected. You can monitor inputs/outputs, check program execution, and troubleshoot any issues using the programming software.
Always refer to the user manuals and documentation provided by LG for your specific PLC model and programming cable for detailed instructions and troubleshooting tips. Each PLC model and software suite may have its own unique setup procedures and requirements.
