WAGO 750-557 4-Channel analog output module 10VDC price in BD
The WAGO 750-557 is a 4-channel analog output module designed to provide voltage output signals. When using the WAGO 750-557 module. Refer to the product manual and accompanying documentation for detailed setup instructions. There is configuration parameters and compatibility guidelines specific to your application and system setup.
Key features and usage:
- Channels: The wago module has four independent output channels, allowing you to control up to four separate voltage outputs.
- Output Type: specifically in the range of 0 to 10 volts DC. This means each channel can output a voltage within this range based on your control settings.
- Resolution: The module likely has a specified resolution that determines the smallest incremental change in voltage that it can accurately output. Higher resolution means finer control over the output voltage.
- Connection: These modules are typically designed to be used within a WAGO I/O System, which involves connecting the module to a compatible controller or PLC (Programmable Logic Controller). The connections are usually made via standard fieldbus systems like PROFIBUS, Modbus, or Ethernet-based protocols.
- Control: To use the module, you would configure it within your PLC or control system software. You can set the desired voltage output values for each channel based on your application requirements.
- Applications: Analog output modules like the 750-557 are commonly used in industrial automation, process control systems, and other applications where precise voltage control is necessary. They allow automation systems to interface with external devices that require analog control signals.
- Compatibility: Ensure that the module is compatible with your existing control system or PLC. WAGO modules are typically versatile and work with various industrial automation systems.
750-557 wago 4-channel analog-output-module Description:
| Technical data: | |
| Number of analog outputs | 4 |
| Total number of channels | 4 |
| Signal type | Voltage |
| Voltage signal voltage | -10 +10 VDC |
| Actuator connection | 4 x (2-wire) |
| Resolution (bit) | 12 bits |
| Data width |
4 x 16-bit data; 4 x 8-bit control/status
|
| Load impedance | 5 kΩ |
| Conversion time | 10 ms |
| Measurement error | 25 °C |
| Measurement error – deviation from the upper-range value | 0.1 % |
| Temperature error of the upper-range value | 0.01 %/K |
| Output error, deviation of the upper-range value | 0.1 % |
| Temperature error of the output range value | 0.01 %/K |
| Recovery time | 100 ms |
| Supply voltage | 5 VDC |
| Power consumption | 125 mA |
| Supply voltage |
24 VDC
|
| Isolation | 500 V |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity (power jumper contacts) | 10 A |
| Connection data | |
| Connection technology: inputs/outputs | 8 x CAGE CLAMP |
| Connection type (1) | Inputs/Outputs |
| Solid conductor | 0.08 to 2.5 mm² |
| Fine-stranded conductor | 0.08 to 2.5 mm² |
| Manual | Diagram |
