Mitsubishi Ethernet-interface block FX3U-ENET-ADP seller in Bangladesh is BD Engineering Solution. BD Engineering Solution also provides professional PLC, HMI, VFD/INVERTER, SERVO MOTOR & DRIVE, POWER SUPPLY repair services. Mitsubishi PLC, HMI, VFD distributor in Bangladesh. keep connect with us. We are best in Bangladesh.
Mitsubishi Ethernet-interface block FX3U-ENET-ADP:
- Manufacturer: Mitsubishi Electric
- Product No.: FX3U-ENET-ADP
- Product type: Ethernet Interface Block
- Data transmission speed: 100Mbps or 10Mbps,
- Communication type: Full/half-duplex
- Transmission type: Baseband
- Top segment length: 100m
- Top number of nodes,PLC
- Connectors: RJ45
- MELSOFT connection + MC protocol + data monitoring ? 4 connection
- Suggest PLC: FX3S, FX3G ,V2.00 or later, FX3U
connection to the FX3S is required FX3S-CNV-ADP.
Connection to the FX3G is required FX3G-CNV-ADP.
FX3U - Power supply: 30mA / DC5V
- Ambient temperature: 0 ~ 55 °C, -25 ~ 75 °C ·
- Relative humidity: 5 ~ 95% RH
- Frequency: 57 ~ 150Hz:
- Acceleration: 4.9m
- Direct mounting at the time Frequency: 10 ~ 57Hz:
- Half amplitude: 0.075mm X, Y, Z every direction 10 times
- Frequency: 57 ~ 150Hz:
- Acceleration: 9.8m is best
Technical data:
| function | Description |
| Parameter status | IP address, Ethernet address, etc. are displayed. |
| Error history*1 | error code, port number, date, time, etc. |
| Status of each connection | Host Station Port No., Destination IP Address. |
| Status of each protocol | TCP packet. |
| Technical specification | |
| Protocol: |
MC Protocol, TCP/IP, UDP, SNTP
|
| Communication mode: |
Full duplex/half duplex
|
| No. of simultaneous open connections: | 4 |
| Interface |
IEEE802.3u , IEEE802.3 (BASE-10)
|
| Connector: | RJ45 |
| Max. transfer rate | 100Mbps, 10Mbps |
| Cable: |
CAT5e STP, CAT5 STP (2-TX)
|
|
CAT5e STP, CAT5 STP, CAT3 STP (t-10)
|
|
| Related I/O points: | 0 |
| Power supply: |
5V d.c./30mA (mm)
|
| Dimensions: |
w23 x h90 x d81.5mm
|
