Conductive level control Model 61F-GP-N2 61F-GPN
The Conductive level 61F GP-N2 available at bd engineering in Bangladesh. Also, available model 61F-GPN (NT-ND-NL). The conductive type level controller contains a plug-in controller. That controller connected to a set of stainless steel probes. It cuts to length and placed vertically into the liquid.
A low voltage is put in between these probes and the earth probe. Between the earth probe and the high-level probe, the water gives a current. When the water level reaches the high-level probe the output relay in the controller is moving and also don’t move when the water level falls under it.
Technical data:
| Supply voltage | 24, 110, 120, 220, 230, 240 VAC; 50/60 Hz |
| Operating voltage range | 85% to 110% of rated voltage |
| Inter electrode voltage | 8 (VAC) |
| Power consumption | Approx. 3.2 VA |
| Operate resistance | 4 KÙ min. Between electrode E1 and E3 |
| Release resistance | Between electrode E2 and E3 |
| Response time | Operate 80 ms Release 160 ms max. |
| Control output of Product | 10 A, 3 A, 250 VAC (at 40°C) (at 55°C) |
| Insulation resistance |
100 MÙ max. (at 500 VDC)
|
| Dielectric strength | 2,000 VAC, 50/60 Hz for 1 min |
| Ambient temperature | Operating: –10°C to 55°C |
| Ambient humidity | Operating: 45% to 85% |
| Approved standards | EN61326-1 Industrial electromagnetic environment |
Conductive level 61F GP-N2 closed up the plug-in controller for point control of conductive liquid level. 24/110/120/220/230/240 VAC operation is possible.
