Autonics Fiber Optics Sensor BF3RX
The Autonics BF3RX is a high-accuracy, compact Fiber Optic Amplifier belonging to the BF3R Series. It serves as the sensing control unit for various fiber optic cables (sold separately), which can be used for both diffuse-reflective and through-beam sensing applications in industrial automation.
Specification:
| Model | BF3RX |
| Supply Voltage | 12V to 24VDC |
| Type | Built-in twin volume |
| Power Consumption | Supply Voltage 24VDC & Current 40mA) |
| Operation mode | Dark /Light ON (Make by control wire |
| Series | BF3RX |
| Source of Light | Red LED 660nm |
| Response Time | 1 ms Maximum |
| Output type | PNP Open Collector |
| Sensitivity Adjustment | Coarse adjustment. fine adjustment |
| Temperature of Environment | -10 to 50℃ |
| Made in | China |
| Brand | Autonics |
| Stock | Available in our stock |
| Condition | New |
| Imported | from china |
| protection circuit | Output Short Circuit Protection |
| Noise Resistance | ±240V the square wave noise (pulse width: 1μs) |
| Dielectric Strengths | for 1minute Voltage 1,000VAC, Frequency 50/60Hz |
| Vibrations | For 2 Hours 1.5mm Amplitude at the frequency |
| Shocks | 3 times 500m/s2 (Approximately 50G) in each X, Y, Z direction |
| The environment of Ambient illumination | Sunlight: Max. 11,000|x , Incandescent lamp: Max. 3,000 |
| The environment | -10 to 50-degree Celsius, Storage:- -25 to 70 degree celsius |
| Ambient humidity | 35 to 85%RH, Storage: 35 to 85%RH |


