No products in the cart.
FX2N-4DA-Mitsubishi Module-Digital to Analog-Converter.
Technical data:
| Item |
Specification |
| Analog circuits | 24V DC ± 10%, 55mA |
| Digital circuits | 5V DC, 30mA |
| Isolation |
Photo-coupler isolation between analog and digital circuits. DC/DC converter isolation of power from the main unit.
No isolation between analog channels. |
| Number of occupied I/O points |
The analog block occupies 8 points. (can be either inputs or outputs)
|
|
Item
|
Voltage input |
Current input
|
| Either voltage or current input can be selected with your choice of input terminal. Up to four input points can be used at one time. | ||
| Analog input range | DC -10V to +10V this unit may be damaged by an input voltage in excess of ± 15V. |
DC -20mA to +20mA
this unit may be damaged by an input current in excess of ± 32mA. |
| Digital output | 12-bit conversion stored in 16-bit 2’s complement form. Maximum value: +2047 Minimum value: -2048 | |
| Resolution | 5mV (10V default range 1/2000) |
20mA (20mA default range 1/1000)
|
| Overall accuracy | ± 1% (for the range of -10V to +10V) |
± 1% (for the range of -20mA to +20mA)
|
| Conversion speed | 15ms/channel , 6ms/channel | |
| Item |
Specification |
| General specifications | Same as those for the main unit |
| Dielectric withstand voltage |
500V AC, 1min
|
Mitsubishi FX2N 4DA analog output modules give the user with four analog outputs. FX0N/FX2N controller to the analog signals needed by the process and the modules convert digital values from the model part. The modules can output both electricity and voltage signals With 4 analog output channels. It needs a separate 24Vdc power source.
Products FX1S, FX1N, and FX2N PLC specified. These are DIN rail mounts and are 90(mm) maximum and 87(mm) so deep. FX2N-4DA-Mitsubishi Module-Digital to Analog-Converter.
The FX2n-4DA analog special function block has 4 analog output signal channels. The output channels 2N take a digital value and output analog signal. This is known as a D/A conversion. TheFX2n-4DA has a max resolution of twelve bits. The selection voltage i/o is by user wiring. Analog ranges of -10 to 10VDC and 0 to 20mA may be selected for each channel.
2 reviews for FX2N 4DA Mitsubishi Module Digital to Analog Converter
Only logged in customers who have purchased this product may leave a review.
Mirol cheqr –
Really good price
SISM –
https://bdengineeringsolution.com/product/fx2n-4da-mitsubishi-module/