Siemens MICROMASTER MM4 VFD-Inverter PROFIBUS Module 6SE6400-1PB00-0AA0
The Siemens MICROMASTER MM4 Variable Frequency Drive (VFD) series can be equipped with various communication modules to enhance its connectivity and integration within automated systems. The PROFIBUS module (part number 6SE6400-1PB00-0AA0) is specifically communication between the MICROMASTER MM4 series drives and a PROFIBUS network
PROFIBUS module for the MICROMASTER MM4:
- PROFIBUS Compatibility with PROFIBUS DP (Decentralized Peripherals) networks, allowing the drive to communicate with other PROFIBUS-enabled devices and control systems.
- Data Exchange to Supports cyclic data exchange for real-time control and monitoring of the drive.
- Facilitates the parameterization of the VFD as well as diagnostics, enabling efficient troubleshooting and maintenance.
- Allows for the exchange of process data and diagnostic information between the drive and the central control system.
Setup & Configuration:
- The PROFIBUS module is inserted into a designated slot on the MICROMASTER MM4 VFD. Ensure the VFD is powered down during installation to avoid any electrical hazards.
- Connect the PROFIBUS cable to the module, ensuring proper termination and grounding as per PROFIBUS guidelines.
- Use the Siemens Starter software or a similar configuration tool to set up the communication parameters. This includes setting the PROFIBUS address, baud rate, and other necessary settings.
- Enhanced Connectivity By integrating the VFD with a PROFIBUS network, users can achieve more sophisticated control and monitoring capabilities.
- Improved Efficiency & Real-time data exchange helps optimize the performance of the drive and the overall system.
- The module facilitates easy integration into existing PROFIBUS networks, reducing installation time
