Power Supply 10A Phoenix Contact QUINT-PS/1AC/24DC/10

Power Supply 10A Phoenix Contact QUINT-PS/1AC/24DC/10

Power-Supply 10A Phoenix Contact-QUINT-PS/1AC/24DC/10 and This Power Supply of phoenix contact 10A. Phoenix Contact QUINT-PS/1AC/24DC/10 good products available in BD engineering solution. The Phoenix Contact QUINT-PS/1AC/24DC/10 is a powerful and reliable power supply from the QUINT POWER series, designed for industrial applications. Here’s a detailed overview of its specifications, features, and applications:

Phoenix Contact QUINT-PS/1AC/24DC/10

• Model Number: QUINT-PS/1AC/24DC/10
• Output Voltage: 24V DC
• Output Current: 10A
• Power Rating: 240W
• Input Voltage: 85-264V AC (single-phase) / 90-350V DC

Features:

1. High Efficiency: Up to 94.6% efficiency, which reduces energy consumption and heat generation.
2. Advanced Monitoring: Preventive function monitoring provides early warning of critical operating states before faults occur.
3. Adjustable Output Voltage: Output voltage can be adjusted between 18V and 29.5V DC.
4. Power Boost: Dynamic Boost provides up to 200% of the nominal current for up to 5 seconds to start heavy loads.
5. Robust Design: Designed for harsh industrial environments with high electromagnetic compatibility (EMC).
6. Safety and Reliability: Includes short-circuit protection, overload protection, and overvoltage protection to ensure safety and reliability.

Technical Details:

• Input Voltage: 85-264V AC (nominal range), 90-350V DC
• Input Frequency: 45-65 Hz
• Inrush Current: <15 A

Output Specifications:

• Output Voltage: 24V DC (adjustable from 18V to 29.5V)
• Output Current: 10A
• Power Rating: 240W
• Efficiency: Up to 94.6%
• Ripple and Noise: <50 mVpp

Protection and Monitoring:

• Overvoltage Protection: Yes
• Overload Protection: Yes
• Short-Circuit Protection: Yes
• Preventive Monitoring: Yes, with alarm relay for monitoring function status

Installation and Usage area:

1. Mounting DIN: Securely mount the power supply on a 35 mm DIN rail in an appropriate enclosure with sufficient ventilation.
2. Wiring systems: Connect the input and output terminals according to the wiring diagram provided in the user manual. Ensure all connections are tight and comply with local electrical codes.
3. Adjusting Output Voltage: If needed, adjust the output voltage using the front-panel adjustment knob.
4. Maintenance: Periodically check the power supply for dust accumulation and clean as necessary. Ensure proper operation and recalibrate if required.

The power supply meets the specific requirements of your application, including input voltage, output current, environmental conditions, and certification standards.