There have a Vibratory Feeder Control Unit-SDVC20-L CUH for Vibratory. The SDVC20-S and L type CUH Feeder Control Unit for Vibratory Bowl feeder/Parts feeder/Linear Feeder/electromagnetic vibratory feeding control in Bangladesh.
Description: Feeder Control Unit-SDVC20-L CUH
The indoor digital voltage parameter circuit can abbreviate tools speed variation mains voltage function. The controller will raise the output voltage from 0 to the present value. 2 NPN switch sensors or PLCs can be joined to turn switch both on and off the regulator. Photoelectric Sensor ON/OFF Control:The CUH Astute Photo-electric Sensor can connect to turn on/off the controller. Output voltage of the controller adjusts remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
The controller can output low voltage DC power related to ON-OFF Control of the controller to drive a solenoid or extra outside devices. Overheating Aegis: If the internal temperature of the controller gets too high, the controller will stop its output to bulwark itself. The manager will stop its output to obviate the state and the load. If the input voltage is too high; the power supply of the controller will shut to save itself.
Specification: SDVC20-L CUH
| Name-Feeder Control Unit-SDVC20 | Min | Max |
| Input Power Voltage | 85V | 440V |
| Output Power Voltage | 0 | 440V |
| Output Current | 0 | 10A |
|
Output Frequency
|
50/100 Hz | |
| 60/120 Hz | ||
| Output Power | 0 | 2200VA |
| Output Waveform | Tangent Sine | |
| Voltage Adjust Accuracy | 1V | |
| Time Delay Range | 0 | 20s |
| Time Delay Accuracy | 0.1s | |
| Soft Startup Time | 0 | 10s |
| Auxiliary Power Supply Voltage | 22 | 26V |
| Auxiliary Power Supply Current | 0 | 200mA |
| Standby Power Consumption | 1.5 | 3W |
| Feeder Control Unit Display Method | 4digit | |
|
Feeder Control Unit-SDVC20 Control Method
|
1-5V | |
| Standard TTL Electric Level |
||
| 4 Buttons plus LED | ||
