Weintek Touch Screen HMI MT8071iE / MT6071iH/MT6070iH importer and supplier in Bangladesh is BD Engineering Solution. The MT6000/8000i series was tested to conform to ECU CE necessities. this means that the circuitry is designed to withstand the results of electrical noise. this does not guarantee noise immunity in severe instances. proper cord routing and grounding will ensure the right operation. The Weinview/Easyview Mt6100i- Weinview TK6100i, TK6100IV5, TK6100IV Weinview MT6103iP, Mt6100iV2, Mt8100i, MT8103i, Mt8102iE
Datasheet |
||
Display-HMI
|
Display | 7” TFT |
Resolution | 800 x 480 | |
Brightness (cd/m2) | 400 | |
Contrast Ratio | 500:1 | |
Backlight Type | LED | |
Backlight Life Time | >30,000 hrs. | |
Colors | 16.7M | |
LCD Viewing Angle (T/B/L/R) | 70/50/70/70 | |
Touch Panel
|
Type | 4-wire Resistive Type |
Accuracy | Active Area Length(X)±2%, Width(Y)±2% | |
Memory
|
Flash | 128 MB |
RAM | 128 MB | |
Processor type | Microprocessor | 32 bits RISC Cortex-A8 600MHz |
I/O Port connection
|
SD Card Slot | N/A |
The USB Host for connecting | USB 2.0 x 1 | |
USB | N/A | |
Ethernet | 10/100 Base-T x 1 | |
COM Port | COM1: RS-232 COM2: RS-485 2W/4W COM3: RS-485 2W |
|
RS-485 Dual Isolation | N/A | |
CAN Bus | N/A | |
HDMI | N/A | |
Audio Output | N/A | |
Video-Input | N/A | |
RTC | Built-in | |
Weintek Touch Screen HMI MT8071iE Power |
Input Power | 24 ±20%VDC |
Power Isolation | Built-in | |
Power Consumption | [email protected] | |
Voltage Resistance | 500VAC (1 min) | |
Isolation Exceed Resistance | 50 MW at 500 VDC | |
Vibration Endurance |
10-25 Hz (30 minutes)
|
|
Specification | PCB Coating | Yes |
Cooling System | by The Control Panel Air supply | Yes |
Enclosure | Plastic | |
Dimension | 200.3 x 146.3 x 34 mm | |
Panel Cutout | 192 x 138 mm | |
Weight | Approx. 0.6 kg | |
Mount | Panel mount | |
Environment
|
Protection Structure | NEMA4 / IP65 Compliant Front Panel |
Storage Temperature | -20° ~ 60°C (-4° ~ 140°F) | |
Operating Temperature | 0° ~ 50°C (32° ~ 122°F) | |
Relative Humidity | 10% ~ 90% (non-condensing) | |
Certificate
|
CE Mark certificate | CE marked |
ATEX | ATEX Zone 2/22 Category 3 G/D | |
Software | EasyBuilder Pro V6.10.04 latest versions |
EasyBuilder Pro V4.10.04 or later versions
|
There are many more products Weintek -HMI is ready to stock in the BD ENGINEERING STORE. There is MT8071iE, MT8071iE, MT8071iP, MT8121iE, MT6050ip, MT6103iP, MT6103iP, MT6103iP, MT6103iP, MT6103iP, MT6103iP
MT Series is International Language Supported-MT8071iP, MT8071iP, MT8102iP, MT8102iP, MT8053iE, MT8100iE, MT6050IP , MT6070iH, MT6070iH, MT6056i, MT6070iH, MT6100i, MT8070iE,MT8071iE, MT8150iE, MT8151IiE, MT8100iE, MT8101iE, MT8121iE Also Weinview Touch-HMI TK6070iK, TK6070iP, TK6100i, TK6100iV, TK8071iP, TK8071iP
Mirol Cheryl –
WEINTEK Taiwan HMI need