Danfoss KPS39 060-3102 Pressure Switch Thermostat The KPS Series comprises of a progression of strain and temperature controlled switches. In this series, exceptional consideration has been given to meeting requests for an elevated degree of nook, vigorous and smaller development, and protection from shock what’s more, vibration. For KPS pressure switches the place of the contacts relies upon the strain in the gulf association and the set scale esteem. For KPS indoor regulators the place of the contacts relies upon the temperature of the sensor and the set scale esteem. The series covers generally outside as well as indoor application necessities and is reasonable for use in checking caution and control frameworks in production lines, diesel plants, blowers, power stations and on board sends.

Danfoss KPS39 060-3102 Pressure Switch Thermostat

Danfoss KPS39 060-3102 Specification

Switch	Single pole changeover (SPDT)	Contact material: Gold-plated silver contact
Contact load (when Au surface is burnt away)	Alternating current	Ohmic 10 A, 440 V, AC-1 Inductive 6 A, 440 V, AC-3 4 A, 440 V, AC-15 Starting current max. 50 A (locked rotor)
	Direct current	12 W, 220 V, DC-13, see curve, fig. 4, page 5
Ambient temperature	KPS 31 – 39	-40 – 70 °C
Temperature of medium 1	KPS 31 – 39	-40 – 100 °C
Vibration resistance	Vibration-stable in the range 2 – 30 Hz, amplitude 1.1 mm og 30 – 300 Hz, 4 g.
Enclosure	IP67 (including IPX6) according to EN 60529. The pressure switch housing is enamelled pressure die cast aluminium (GD-AlSi 12). The cover is fastened by four screws which are anchored to prevent loss. The enclosure can be sealed with wire.
Cable entry	Pg 13.5 for cable diameters from 5 – 14 mm.
Identification	The type designation and code no. of the unit is stamped in the side of the housing.