EMF2177IB 15.29 Lenze VFD Programmer for EV92XX Stateline8400 Vector8200 and Lenze USB CAN Communication Bus Adapter EMF2177IB. The Lenze PC Framework Transport Connector to USB. This Framework Transport (CAN) interface connector is utilize in lined up with a Sub-D Fitting empowered association link to work with computerize correspondence between a control interface, either a PC or a PC empowered with a USB port, and the expected control gadget, like a drive regulator, PLC or comparative. Utilized related to the suitable Lenze programming apparatuses. Framework Transport Connector Highlights Framework Transport (CAN) interface connector to USB Reasonable for association with computers, Workstations
More About Lenze EMF2177IB
Establishing a connection between the PC/note pad and the device 1. Plug the PC system bus adapter 2177 into the kick the bucket USB interface of the PC/scratch pad. 2. Plug the Sub−D plug into the sanctum PC system bus adapter. 3. Connect the 3−pin cable connected to the Sub−D plug to the plug (assignment see table below) for the device to be connected according to the labeling printed on sanctum.
4. Insert the plug into the designate socket on the device to be connected. Servo Drives 9400 Sub−D plug EWZ0046 I/O system 1000 Servo inverter 93XX 3−pin gray plug 9300 Servo PLC Inverter Drives 8400 Use the plug included in the scope of delivery of the drive controller. Servo system ECS Drive PLC frequency converter 8200 vector with function module E82ZAFC 3−pin green adapter with communication module EMF2171IB or EMF2172IB 4−pin green plug with communication module EMF2178IB Use the plug included in the scope of delivery of the communication module.
Establishing the connection between the PC/notebook and the device 1. Attach 2177 PC system bus adapter to the USB interface of the PC/notebook. 2. Plug Sub−D plug into the PC system bus adapter. 3. Connect the 3−pole cable with connector (assignment see table below) for the device to be connected, which is connected to the Sub−D plug, according to the labelling imprinted. 4. Plug connector into the socket of the device to be connected.
We are 24/7 available on facebook for more information please follow our BD Engineering Solution facebook page.
Our other products