VIPA 222-1HF00 Signal modules digital best price seller is BD Engineering Solution. VIPA 222-1HF00 Digital output modules are very useful. The digital output module uses relay outputs to control the connected loads at the process level and accepts binary control signals from the central bus system. The backplane bus provides power to the module. Terminal 1 must be connected to the load voltage. You must balance the load current between terminals 1 and 10 when the total current exceeds 8A. The module has eight channels, and an LED shows the status of each channel.

VIPA 222-1HF00 Signal modules

Backplane bus Current consumption	300 mA
Power loss limit	2 W
Outputs	8
Rated load voltage	DC 30 V/ AC 230 V
Total current per group 40°C	8 A
Total current per group 60°C	8 A
Vertical configuration Total current per group	8 A
Output current	5 A (signal “1”)
Output Signal logic	Isolated
Output delay	10 ms (“0” to “1”)
Output delay	5 ms (“1” to “0”)
Switching frequency	maximum 0.33 Hz (resistive load)
Switching frequency	maximum 0.33 Hz (inductive load)
Switching frequency	0.33 Hz maximum (lamp load)
Operating cycle	10^7 (relay outputs)
Switching capacity	5 A
Output data size limit	1 Byte