VIPA 253-1DP01 INTERFACE MODULE best price seller in Bangladesh is BD Engineering Solution. VIPA 253-1DP01 IM253 PROFIBUS-DP SLAVE. An internal power supply is present in each PROFIBUS slave. The bus coupler’s electronics are powered by this DC 24V power supply, which also powers any modules that are connected to the backplane bus. The maximum Technical Data contains the statement “current drain at backplane bus.” Reverse polarity is prevented from entering the power supply. The backplane bus and PROFIBUS are not connected to one another.
VIPA 253-1DP01 INTERFACE MODULE
| Power supply | DC 24 V (rated value) |
| Power supply | DC 20.4…28.8 V (permitted range) |
| Current consumption | 70 mA (no-load operation) |
| Current consumption | 1 A (rated value) |
| Inrush current | 65 A |
| I²t | 0.85 A²s |
| Maximum current drain at backplane bus | 3.5 A |
| Power loss | 2.5 W |
| Fieldbus | PROFIBUS-DP to EN 50170 |
| Type of interface | RS485 |
| Connector | Sub-D, 9-pin, female |
| Topology | Linear bus & bus termination at both ends |
| Participants maximum | 125 |
| Node addresses | 1 – 99 |
| Transmission speed minimum | 9.6 kbit/s |
| Transmission speed maximum | 12 Mbit/s |
| Maximum Address range inputs | 244 Byte |
| Maximum Address range outputs | 244 Byte |
