Allen-Bradley MicroLogix Analog Input Module 1762-IT4 best price seller in Bangladesh is BD Engineering Solution. An analog input module for the MicroLogix 1200 is the Allen-Bradley I/O module 1762-IT4. This module accepts signals of +/- 50 mV and +/- 100 mV and is a thermo couple and millivolt input module with four channels and a CJC sensor that is compatible with thermo couple sensors J, K, T, E, R, N, S, B, and C. It uses the Sigma-Delta conversion method and has a resolution of 15 bits (plus the sign). Channel update time and input filtering are selectable features.
Allen-Bradley MicroLogix Analog Input Module 1762-IT4
| Analogue outputs Type | 4 |
| Input current Type | No |
| Input voltage Method | No |
| Input resistor Method | No |
| Input resistance thermometer Type | No |
| Input thermo couple Method | Yes |
| Input signal configur able Type | Yes |
| Output current Method | No |
| Output voltage MEthod | No |
| Output signal configur able Type | No |
| Analogue inputs configur able Type | Yes |
| Analogue outputs configur able Method | No |
| electric connection Method | Screw connection |
| Rated work voltage Type | 30V DC |
| Open-circuit detection time Type | 7 ms |
| Bus current draw Method | maximum 50 mA @ 24V DC |
MicroLogix Analog Input Module
The Allen-Bradley 1762-IT4 is a MicroLogix 1200 simple information module. In particular, this module is a thermo couple input module made specifically for temperature applications and direct transducer measurement.It is used with a Cold Junction Compensator (CJC) to improve the module’s accuracy and accepts a wide range of thermo couple sensor types, including types, J, K, T, E, R, N, S, B, and C. This module accepts direct wiring of analog mV signals, such as +/- 50mV and +/- 100mV signals, other than thermo couple sensors.
The measuring range of the 1762-IT4 for temperature applications is -210 to 2315 degrees Celsius (-346 to 4199 degrees Fahrenheit). This module can be wired to up to four thermo couple sensors, which convert the received signals into data with a 15 bit (plus sign) resolution that can be configured for engineering units x one; scaled-for-PID;% of formats for full-scale and raw/proportional data.
Each module channel has filter frequencies that can be set to eliminate fluctuations and stabilize readings. Then Hz, fifty Hz, sixty Hz, 250 Hz, 500 Hz, and one thousand Hz are the selectable frequencies. Following various input wiring, signal wires are used to close out the input channels.
Alongside the MicroLogix 1200 controller or another MicroLogix 1200 I/O module, the 1762-IT4 is mounted. It locks in place using the snap-on level on top of the module and adheres to standard DIN rail mounting. The type of sensor being used must be compatible with the cables that will be used with this module. Then Belden 8761 wire is recommended for wiring the mV signal.
