EL9410 Power-supply terminal-E-bus diagnostic- Beckhoff is at a reasonable price in bd.
Technical data of EL9410 Power-supply terminal-E-bus diagnostic-Beckhoff:
Technology | power supply terminal |
Short-circuit proof | yes |
Input voltage | 24 V DC |
Input current | type. 70 mA + |
Output voltage | 5 V for E-bus supply system |
Output electricity | 2 A |
E-bus | – |
Electrical isolation | 500 Voltage |
Insulation voltage input/output | – |
Power contacts | maximum. 24 V DC/maximum. 10 A |
Diagnostics in the process image | yes |
Special features | standard EL supply |
Weight | approx. 65 g |
Operating/storage temperature | 0+55 °C/-25…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable |
Pluggable wiring | for all ESxxxx terminals |
Approvals | CE, UL, Ex |
technical data-
Description Order Number | CPU 226 DC/DC/DC 6ES7 216–2AD21–0XB0 |
CPU 226 AC/DC/Relay 6ES7 216–2BD21–0XB0
|
|
Onboard Communication Number of ports Electrical interface Isolation (external signal to the logic circuit) PPI/MPI baud rates Freeport baud ratesMaximum cable length per segment up to 38.4 kbaud 187.5 kbaud Maximum number of stations Per segment Per network Maximum number of masters PPI master mode MPI connections Cartridge Options Memory cartridge |
2 ports RS-485 Not isolated 9.6, 19.2, and 187.5 kbaud 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, and 38.4 kbaud1200 m 1000 m32 stations 126 stations 32 masters Yes 4 total, 2 reserved: 1 for PG and 1 OPProgram, Data, and Configuration 200 days, typical |
2 ports RS-485
Not isolated 9.6, 19.2, and 187.5 kbaud 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, and 38.4 kbaud1200 m 1000 m32 stations 126 stations 32 masters Yes 4 total, 2 reserved: 1 for PG and 1 OPProgram, Data, and Configuration 200 days, typical |
|
Power Supply |
|||
Line voltage–permissible range
Input current CPU only/max load Inrush current Isolation |
20.4 to 28.8 VDC 150/1050 mA 10 A at 28.8 VDC Not isolated 10 ms at 24 VDC 3 A, 250 V, Slow Blow 1000 mA15.4 to 28.8 VDC 400 mA Same as an input line 1.5 A Approx. Not isolated |
85 to 264 VAC
47 to 63 Hz 40/160 mA at 240 VAC 80/320 mA at 120 VAC type 20 A at 264 VAC 1500 VAC 80 ms at 240 VAC, 20 ms at 120 VAC 2 A, 250 V, Slow Blow 1000 mA20.4 to 28.8 VDC 400 mA Less than 1 V peak-to-peak |
The EL9410 power supply voltage is used to refresh the E-bus. Data is exchanged between the coupler and the EtherCAT Terminal over the E-bus. Each terminal draws a certain amount of current from the E-bus. This current is fed into the E-bus by the relevant coupler’s power supply unit. In configurations with a large number of terminals PLC Controller, it is good to use the EL9410 also supply an extra 2 A to the E-bus. The EL9410 has a diagnostic function which is involved by LED of EL9410 Power-supply terminal-E-bus diagnostic-Beckhoff.
EL9410 | Power supply terminal for E-bus, with good diagnostics. The EL9410 power supply voltage terminal is used to refresh the E-bus. Data is changeable between the coupler and the EtherCAT Terminal over the E-bus.