BANNER BEAM SENSOR MINI-BEAM SM315W-4 Wire
However, RECEIVER OUTPUT PROTECTION: protected against false-pulse on power-up. Moreover, inductive load transientS, power supply polarity reversal, and continuous overload or short circuit of outputs. RECEfVER RESPONSE TIME: sensors will respond to either a “light” or a “dark” signal of I millisecond orlongerduration independent
of signal strength), 500Hz maximum. NOTE: I 00 millisecond delay on power-up; outputs are non-conducting during this time. REPEAT ABILITY of RESPONSE: .14 millisecond, independent of signal strength. RANGE: zero to I foot (0,3m) minimum. Actual range is dependent upon the light-transmission properties of the clear plastic material being sense.
CABLE: SM3 I EPD has PVC-jacketed 2-conductor cable; SM31RPD has PVC-jacketed 4-conductor cable. Standard length is 6 feet (2m).
Models SM3 l EPQD and SM31 RPQD have an integral quick-disconnect (QD) connector. Mating cable (required) must be ordere separately (see
note, page 4) ADJUSTMENTS: SM3 1 RPO has LIGHT/DARK operate select switch and 15-tum slotted brass screw GAJN (sensitivity) adjustment
potentiometer(clutched at both ends of travel). Both controls are located on the rear panel of the sensor and are protecte by a gasketed, clear
acrylic cover.
More About BANNER BEAM SENSOR MINI-BEAM SM315W-4 Wire
IND I CA TOR LED: exclusive. patented Alignment Indicating Device (AID™, US patent #4356393) lights a red LED indicator located on the
rear of the receiver whenever a “light” condition is sense, with a superimposed pulse rate proportional to the light signal strength (the
stronger the signal. the faster the pulse rate). A red LED indicator on the rear of the emitter indicates “power on” condition.
OPERA TING TEMPERATURE: -20 to+ 70°C (-4 to+ !58°F). APPLICATION NOTES: the NPN (current sinking) output of model
SM31RPD is directly compatible a~ an input to Banner logic modules, including all non-amplilied MICRO-AM?3l modules and CL Series
MAXI-AMP™ modules.
We are 24/7 available on facebook please follow our BD Engineering Solution facebook
