EL2809 EtherCAT Terminal 16-channel terminal to the binary control signals from the automation. The actuators at the process level with isolation terminals. short circuit- EtherCAT Terminal contains 16-channels states are exhibited by LEDs. our service is good. stay with us. The outputs are fed via the 24 V power contact in the EL2809. The conductors is connected without tools.it in the case of solid wires with a direct plug-in technique. keep in contact with us.
Technical data:
| Technical data | EL2809 |
| Connection of technology | 1-wire |
| outputs Number | 16 best output |
| Nominal voltage |
24 V DC
|
| Load type voltage |
ohmic, inductive, lamp load
|
| Distributed clock | not available |
| Output current |
0.5 A per channel
|
| Short-circuit current | type. 2 A |
| voltage protection | yes |
| Breaking energy type |
150 mJ
|
| Switching times |
type. TON: 60 µs, type. TOFF: 300 µs
|
| Current consumption E-bus | type. 140 mA |
| Electrical isolation |
500 V
|
| Current power |
35 mA + load
|
| Bit width | 16 outputs |
| Configuration |
no address or configuration is setting
|
| Conductor types |
solid best wire, stranded wire, and ferrule
|
| connection | EL2809 EtherCAT Terminal 16-channel |
| Rated cross-section |
solid good wire: 0.08 mm ferrule: 0.14…0.75 mm²
|
| Weight | approx. 70 g |
| good temperature |
-25 °C
|
| Relative good humidity |
95 %, no
|
| Vibration good resistance |
60068-2-6/EN 60068-2-27
|
| EMC immunity |
61000-6-2/EN 61000-6-4 function
|
| Protect. class |
IP 20/variable
|
| Approvals/markings |
CE, UL, ATEX, IECEx
|
| Ex-Marking | II 3 G Ex nA IIC T4 Gc Ex nA IIC T4 Gc. |
The terminal is opportune for space-preserving use in control cabinets. The connection technology is good for single inputs. All components have to utilize the same point as the EL2809 Beckhoff EtherCat. EL2809 modules are reversal and process load current with outputs overload model. our service is good. stay connect with us.
The EL2809 digital output terminal connects the binary control signals from the automation device to the best actuators at the process level with electrical isolation. The EL2809 is a safe good reversal and processes load currents with saved outputs overload and short-circuit. The EtherCAT Terminal contains 16 channels.
The terminal is suitable for space saving use in control cabinets. The technology is suitable for single inputs. All components have to use the same point as the EL2809. The power contacts are involved with the system. keep in contact with our company. and get your products
