FX2N-4DA Mitsubishi Analog Output Module

FX2N-4DA Mitsubishi Analog Output-Module is available in BD Engineering Solution at a special price.

Product Details:

Brand	Mitsubishi Electric
Model	FX2N 4DA
Product Type	Analog Output Modules
Power Supply	5 VDC/30 mA
Analog Channels	4 outputs
Cognate I/O points	8
Condition	Fresh
Origin	Japan

Analog Output Module With four analog output channels. It needs a separate 24Vdc power source. Products in this range are for use with FX1S, FX1N, and FX2N PLC unless designated otherwise all are DIN rail mount and are 90mm high and 87mm deep.

All of the following products, except the Extension Cable, annex directly to the right-hand cessation of the precedent unit, block, or module utilizing the short integral lead.

FX2N-4DA Mitsubishi Analog Output-Module provides the user with four analog outputs. The modules replace four values from the FX0N controller to the analog signals. It’s needed by the process of PLC. It needs a different 24Vdc power supply.

 FX1S, FX1N, and FX2N PLC all are specified in the main section Mitsubishi. All are rail-DIN mounts and are 87(mm) deep and 90(mm) high. All of the products, without the Cable, attach to the right-hand end of the block, previous unit, or module using the integral lead.

The FX2n-4DA analog function block has four analog output channels. The output channel 2N has a digital value and output analog signal. This is called D/A conversion. The FX2n-4DA has a resolution of twelve bits. Bd Engineering solution also involving analog ranges of -10 to 10VDC, and 0 to 20mA may be selected for each channel.