SUPERPRO-610P, Universal IC Chip Device Programmer for ARM9 32 bit MCU, EPROMs, Flashs, PLDs
Universal IC-Superpro 610P High-Speed Universal Programmer, USB 2.0 The SuperPro-610P is a universal production programmer equipped with an ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, flash memories, PLDs, and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages.
The programming speed is very high based on how the algorithm technology use. That means how CPU of the programmer during the selection of a device we install. The optional ISP adapter permits program components soldered on printed circuits. Other devices in special packages. The software works for Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be installed freely.
Memory devices such as EPROM, Paged EPROM memory, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller Packages supported memory device: TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, FBGA, VFBGA, BGA, CSP, SCSP, and many more.
Tests and Detects are not the correct insertions of the device and defective pin saved against short circuits and over-voltages.Computer interface with USB 2.0 AC Power Adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W Dimensions: 178 x 130 x 40 mm, Weight: 0.8kg Kit Contents Programmer with 48-pins ZIF socket Power Adaptor 90-260Vac to 12Vdc USB-B to USB-A cable Software on CD-ROM User manual in English and French PC Based Programmers.
Universal IC-Superpro 610P technical data :
|Accessory Type||:||Universal IC Chip Device Programmer|
|For Use With||:||ARM9 32 bit MCU, EPROMs, Flashs, PLDs|
|Rohs||:||RoHS Certificate of Compliance|
|Programmer Name||:||SUPERPRO 610P|
|Memory Type Programmed||:||EEPROM, EPROM, FLASH|