INVERTER VFD YASKAWA-E1000 CIMR-ET4A0058AAA 30KW INPUT AC3PH 380-480V 50/60Hz 58A OUTPUT: AC3PH 0-480V 0-200HZ 58A MADE IN JAPAN. There has a frequency INVERTER which is Variable Frequency Drive(VFD) has manufactured the YASKAWA E1000 series
- The inverter has a capacity fire due to erroneous connection of the potency supply, short circuit in phase
- Inverter loses output voltage
- The output voltage or current of the phases is not balanced, the inverter runs jerky, error alarm
- The inverter has a control failure, does not exhibit error codes such as:
- This inverter is not controllable
- The inverter automatically runs when the puissance is first applied while there is no control command to run
- This product is flickering, runs for a while, and then ceases
- The item runs to warm up the motor
- The inverter cannot operate at full load, run for a while and then stop
- The inverter is not running but the screen still shows the virtual frequency
- The screen does not exhibit due to power failure, dead puissance, MMIO board error, LED lost error screen, …
- The inverter is struck by lightning, circuit fire
- The faulty inverter turns on for a long time afore powering on
- The inverter runs for a short period of time, then ceases, turns off the potency, or gives an error of not working
- The inverter has set parameters but cannot preserve, turning off and on again cannot run.
- Errors due to installation, program loss in the control board
Technical Specification of INVERTER VFD YASKAWA-E1000 CIMR-ET4A0058AAA:
| MODEL OF E1000 SERIES | POWER (KW) | PHASE |
| CIMR-ET4A0009FAA | 3.7kW | 3 Pha 380V |
| CIMR-ET4A0011FAA | 5.5kW | 3 Pha 380V |
| CIMR-ET4A0018FAA | 7.5kW | 3 Pha 380V |
| CIMR-ET4A0023FAA | 11kW | 3 Pha 380V |
| CIMR-ET4A0031FAA | 15kW | 3 Pha 380V |
| CIMR-ET4A0038FAA | 18.5kW | 3 Pha 380V |
| CIMR-ET4A0044FAA | 22kW | 3 Pha 380V |
| CIMR-ET4A0058AAA | 30kW | 3 Pha 380V |
| CIMR-ET4A0072AAA | 37kW | 3 Pha 380V |
| CIMR-ET4A0088AAA | 45kW | 3 Pha 380V |
